ZTE ZXV10 B860H V5 (zte-b860hv5)
| Manufacturer | ZTE |
|---|---|
| Name | ZXV10 B860H (Ver 5.0) |
| Codename | zte-b860hv5 |
| Released | 2019 |
| Type | set-top box |
| Hardware | |
| Chipset | Amlogic S905X2 |
| CPU | Quad Cortex-A53 1.8 GHz |
| GPU | Mali G31 MP2 |
| Display | HDMI |
| Storage | 8GB |
| Memory | 2GB |
| Architecture | aarch64 |
| Software | |
Original software  The software and version the device was shipped with. |
Android (TV) 9 |
Extended version The most recent supported version from the manufacturer. |
Android (TV) 12 |
| FOSS bootloader | yes |
| Nura | |
| Category | testing |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
6.7.2 |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
2099.3 |
| Device package |
 device-zte-b860hv5 |
| Kernel package |
linux-postmarketos-amlogic |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Broken
|
|---|---|
Internal storage eMMC, SD cards, UFS... |
Works
|
SD card Also includes other external storage cards. |
Works
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
IR RX |
Untested
|
| Connectivity | |
WiFi |
Broken
|
Bluetooth |
Broken
|
Ethernet |
Works
|
| Miscellaneous | |
USB-A Whether the full-sized USB-A port works. |
Works
|
USB OTG USB On-The-Go or USB-C Role switching. |
Works
|
HDMI/DP Video and audio output with HDMI or DisplayPort. |
Works
|
Primary Bootloader Whether it is possible to replace stock bootloader with U-Boot. |
Untested
|
|---|---|
Secondary Bootloader Whether it is possible to chainload U-Boot from stock bootloader. |
Works
|
Mainline Whether latest upstream versions of U-Boot are not broken and it is possible to use them. |
Works
|
Internal Storage Whether it is possible to boot from internal storage (e.g. eMMC or UFS). |
Works
|
SD card Whether it is possible to boot from SD card. |
Works
|
USB Host Whether it is possible to boot from a USB storage or connect a keyboard. |
Works
|
USB Peripheral Whether it is possible to use device as a peripheral in U-Boot, e.g. for fastboot mode. |
Works
|
Display |
Untested
|
An Amlogic S905X2-based (G12A) Android set-top box manufactured by ZTE. It is commonly distributed as an ISP-branded over-the-top (OTT) device, notably by Indonesian ISP IndiHome.
 |
This article does not cover the ZTE ZXV10 B860H V1/V2, which has a completely different hardware (gxl/S905X). If your device does not have the Android TV marking on the back, it is not a V5. See all versions |
This box runs Android TV 9 to 12. On Android 9 to Android 10 (before 2021 security patch), the secure boot is off. On 2021 security patch onwards, the e-fuse is burned, thus making secure boot permanently on, and USB Download Mode is protected with password.
This guide only applies to boxes with secure boot off. There are no known ways to install to secure boot on boxes as of now.
 |
WARNING: DO NOT update Android if you want to install Nura, or boot into any custom u-boot/OS. Updating Android will burn an e-fuse on the SoC which will permanently enable secure boot, and blocking unsigned code. |
Installation
WIP
Contributors
- donihalim
Users owning this device
- Angsanley (Notes: Bricked, secure boot on)
See also
- pmaports!4886 Initial merge request