Xiaomi 12 Lite (xiaomi-taoyao)
| This device has been tested with Nura, but its device package has not yet been added to the Nura repositories. This means that it cannot be selected in pmbootstrap. |
 Xiaomi 12 Lite running gnome-mobile | |
| Manufacturer | Xiaomi |
|---|---|
| Name | 12 Lite |
| Codename | xiaomi-taoyao |
| Model | 2203129G |
| Released | 2022 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 778G+ (SM7325-AE) |
| Display | 1080x2400 (AMOLED, 60/120 Hz, 6.55") |
| Storage | 128/256 GB |
| Memory | 6/8 GB |
| Architecture | aarch64 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 12 |
Extended version The most recent supported version from the manufacturer. |
Android 14 |
| FOSS bootloader | no |
| Nura | |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
Nura kernel The kernel version that runs on the device's port. |
7.2.2 |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS... |
Works
|
Battery Whether charging and battery level reporting work. |
Works
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Partial
|
Camera |
Broken
|
Camera Flash |
Broken
|
IR TX |
Untested
|
| Connectivity | |
Wi-Fi |
Works
|
Bluetooth |
Works
|
GPS |
Broken
|
NFC Near Field Communication |
Broken
|
| Modem | |
Calls |
Works
|
SMS |
Works
|
Mobile data |
Works
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching. |
Works
|
Fingerprint Fingerprint reader. |
Broken
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Broken
|
Magnetometer Sensor to measure the Earth's magnetism |
Works
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Works
|
Proximity |
Broken
|
Haptics |
Broken
|
Maintainers
Users owning this device
How to enter flash mode
- Bootloader: Power on the device with both and buttons.
How to unlock bootloader
Unlocking the bootloader is tricky on all Xiaomi devices, follow the official process here. You'll have to wait 1 week or even more.
Installation
Using pmbootstrap
 |
Note: The device has not yet been merged into pmaports. Use manual installation. |
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select xiaomi as the vendor and taoyao as the codename.
To flash the image to the device:
- Enter flashing mode (see #How to enter flash mode)
- Run
pmbootstrap flasher flash_kernelto flash the kernel - Run
pmbootstrap flasher flash_rootfs