Sony Xperia Z1 (sony-honami)
Appearance
| This device has been archived. This means that it no longer appears in pmbootstrap and is likely broken. It can still be selected in pmbootstrap init by typing in the vendor and codename, but you will have to build the kernel package manually. |
|
Sony Xperia Z1 | |
| Manufacturer | Sony |
|---|---|
| Name | Xperia Z1 |
| Codename | sony-honami |
| Released | 2013 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 800 (MSM8974) |
| CPU | Quad-core 2.2 GHz Krait 400 |
| GPU | Adreno 330 |
| Display | 1080x1920 |
| Storage | 16 GB |
| Memory | 2 GB |
| Architecture | armv7 |
| Software | |
Original software The software and version the device was shipped with. |
Android 4.2 |
Extended version The most recent supported version from the manufacturer. |
Android |
| Nura | |
| Category | archived |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
Nura kernel The kernel version that runs on the device's port. |
6.16.12-2 |
| Device package |
|
| Kernel package |
|
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Whether charging and battery level reporting work. |
Untested
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
| Connectivity | |
Wi-Fi |
Works
|
Bluetooth |
Untested
|
GPS |
Untested
|
| Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Contributors
- limiter121
- ata2001 (work on Z1C)
Maintainer(s)
- limiter121
Device owners
- 0d
- Ka33 (Notes: Broken display, but touchscreen works)
- Konradybcio (Notes: Vibration motor sometimes works (apparently mainline driver is smarter than stock, lol))
- Pigeon risotto (Notes: does not boot, usb responds)
What works
- Display
- Touchscreen
- Network through USB
- Telnet in initramfs
- SSH
- Wi-Fi
How to enter flash mode
- Fastboot: Hold while connecting the device to a computer with a USB cable.
What does not work
osk-sdl doesn't work:
sony-honami:/home/r# osk-sdl -d a -n a -c /etc/osk.conf -v
commandline read: osk-sdl
commandline read: -d
commandline read: a
commandline read: -n
commandline read: a
commandline read: -c
commandline read: /etc/osk.conf
commandline read: -v
(*) Direct/Thread: Started 'SigHandler' (1742) [CRITICAL - OTHER/0] <134492>...
16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)| DirectFB 1.7.7 |16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)16:41, 29 May 2019 (EDT)~
(c) 2012-2015 DirectFB integrated media GmbH
(c) 2001-2015 The world wide DirectFB Open Source Community
(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2018-10-03 11:56)
(*) Direct/Memcpy: Using libc memcpy()
(*) Direct/Thread: Started 'Fusion Dispatch' (1743) [MESSAGING - OTHER/0] <134492>...
(*) Direct/Thread: Started 'VT Switcher' (1746) [CRITICAL - OTHER/0] <134492>...
(*) Direct/Thread: Started 'VT Flusher' (1747) [DEFAULT - OTHER/0] <134492>...
(*) DirectFB/FBDev: Found 'mdssfb_80000' (ID 0) with frame buffer at 0x00020000, 16320k (MMIO 0x00000000, 0k)
(*) Direct/Modules: suppress module 'linux_input'
(*) Direct/Thread: Started 'Keyboard Input' (1748) [INPUT - OTHER/0] <134492>...
(*) DirectFB/Input: Keyboard 0.9 (directfb.org)
(*) Direct/Thread: Started 'tslib Input' (1749) [INPUT - OTHER/0] <134492>...
(*) DirectFB/Input: tslib touchscreen 0 0.1 (tslib)
(*) Direct/Thread: Started 'PS/2 Input' (1750) [INPUT - OTHER/0] <134492>...
(*) DirectFB/Input: IMPS/2 Mouse (1) 1.0 (directfb.org)
(*) Direct/Thread: Started 'PS/2 Input' (1751) [INPUT - OTHER/0] <134492>...
(*) DirectFB/Input: IMPS/2 Mouse (2) 1.0 (directfb.org)
(*) DirectFB/Input: Hot-plug detection enabled with Input Hub Driver
(*) DirectFB/Graphics: Generic Software Rasterizer 0.7 (directfb.org)
(!) DirectFB/FBDev: No supported modes found in /etc/fb.modes and current mode not supported!
(!) DirectFB/FBDev: Current mode's pixelformat: rgba 8/0, 8/8, 8/16, 8/24 (32bit)
(!) DirectFB/Core/layers: Failed to initialize layer 0!
--> A general initialization error occured
(!) DirectFB/Core: Could not initialize 'layer_core' core!
--> A general initialization error occured
INFO: /home/buildozer/aports/main/sdl2/src/SDL2-2.0.9/src/video/directfb/SDL_DirectFB_video.c (239):A general initialization error occured
Segmentation fault
Photos
-
100px
-
100px
Other Information
- It should be possible to run a mainline kernel on the device. At least there is a
dtsfile already in the 4.14 kernel:arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts - USB device id:
0fce:d19a
Links
- Kernel source code
- Android configuration
- Sony Open Devices (official tutorials, tools, code, etc.)
- !916 Initial merge request