Jump to content

Samsung Galaxy S Relay 4G (samsung-apexq)

From Nura Wiki
Warning WARNING: This device cannot run Nura, as its architecture is unsupported.
Note This device is still running on armhf, although it supports armv7. If you own it, change the device packages' architectures, test it and submit a patch.
Samsung Galaxy S Relay 4G
Samsung Galaxy S Relay 4G
Samsung Galaxy S Relay 4G
Manufacturer Samsung
Name Galaxy S Relay 4G
Codename samsung-apexq
Released 2012
Type slide-out keyboard handset
Hardware
Chipset Qualcomm Snapdragon S4 Plus (MSM8960)
CPU 1.5 GHz dual-core Krait
GPU Adreno 225
Display 480x800 Super AMOLED
Storage 8 GB
Memory 1 GB
Architecture armhf
Software
Original software
The software and version the device was shipped with.
Android 4.0.4
Extended version
The most recent supported version from the manufacturer.
Android
Nura
Category archived
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
no
Nura kernel
The kernel version that runs on the device's port.
3.4.104-5
Device package device-samsung-apexq
Kernel package linux-samsung-apexq
Features
Flashing
Whether it is possible to flash the device with pmbootstrap flasher.
Works
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Works
Battery
Whether charging and battery level reporting work.
Works
Screen
Whether the display works; ideally with sleep mode and brightness control.
Works
Touchscreen
Works
Multimedia
3D Acceleration
Untested
Audio
Audio playback, microphone, headset and buttons.
Untested
Camera
Untested
Connectivity
Wi-Fi
Works
Bluetooth
Untested
GPS
Untested
Modem
Calls
Untested
SMS
Untested
Mobile data
Untested
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Untested
Sensors
Accelerometer
Handles automatic screen rotation in many interfaces.
Untested

Contributors

  • silver

Maintainer(s)

  • silver

Special boot modes

  • Download/Odin Mode: With the device powered off, hold Volume Down, Home and Power while connecting the device to a computer with a USB cable. A warning screen will appear: click Volume Up to enter Download Mode and run Heimdall commands.

Installation

Follow the instructions in Installation/Using pmbootstrap.

$ pmbootstrap init
Vendor: samsung
Device codename: apexq
User interface: mate
$ pmbootstrap install

Boot into Download Mode and run:

$ pmbootstrap flasher flash_kernel
Reboot into Download Mode again
$ pmbootstrap flasher flash_rootfs

The device will then reboot into Nura.

Status

The device boots and Wi-Fi works. Keyboard symbols mapping and screen rotation don't work.

Port information

  • kernel android_kernel_samsung_d2
  • commit 3795379ed3f846bf17908ff29576a93caff5d1d7
  • defconfig LineageOS/android_kernel_samsung_d2/87f5fcaf7afef878914c3fcca2c2fd395f285902/arch/arm/configs/cyanogen_apexq_defconfig
  • deviceinfo populated with boot.img from cm backup March 2017