Samsung Galaxy J8 2018 (samsung-j8y18lte)
Appearance
| This device has been archived. This means that it no longer appears in pmbootstrap and is likely broken. It can still be selected in pmbootstrap init by typing in the vendor and codename, but you will have to build the kernel package manually. |
|
Samsung Galaxy J8 (2018) with GNOME Samsung Galaxy J8 (2018) with GNOME | |
| Manufacturer | Samsung |
|---|---|
| Name | Galaxy J8 (2018) |
| Codename | samsung-j8y18lte |
| Released | 2018 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon 450 (MSM8953) |
| CPU | Octa-core 1.8 GHz Cortex-A53 |
| GPU | Adreno 506 |
| Display | 720 x 1480 (5.9", AMOLED) |
| Storage | 32/64 GB |
| Memory | 3/4 GB |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Android 10 |
Extended version The most recent supported version from the manufacturer. |
Android |
| Nura | |
| Category | archived |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
| Device package |
|
| Kernel package |
|
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Whether charging and battery level reporting work. |
Works
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Broken
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
| Connectivity | |
Wi-Fi |
Works
|
Bluetooth |
Broken
|
GPS |
Untested
|
NFC Near Field Communication |
Broken
|
| Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Works
|
USB OTG USB On-The-Go or USB-C Role switching. |
Works
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Works
|
Magnetometer Sensor to measure the Earth's magnetism |
Broken
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Broken
|
Proximity |
Broken
|
Hall Effect Measures magnetic fields; usually used as a flip cover sensor |
Works
|
| This device is based on the Qualcomm Snapdragon 450 (MSM8953). See the SoC page for common tips, guides and troubleshooting steps |
Users owning this device
- Erfto1 (Notes: SM-J810F - Boots)
- Lucasredelive (Notes: SM-J810M - STOCK ROM - abandoned mainline)
Special boot modes
- Download Mode: With the device powered off, hold and while connecting the device to a computer with a USB cable. A warning screen will appear: click to enter Download Mode and run Heimdall commands.
- Recovery Mode: With the device powered off, hold and while connecting the device to a computer with a USB cable.
Unlocking the bootloader
- Enable developer mode by tapping on the build number seven times in Settings → About phone → Software information
- Return to the main settings page and go to the developer options
- In developer options, enable OEM unlocking. Make sure you have an internet connection if it doesn't show up.
Installation
- Unlock the bootloader if not done.
- Select
j8y18lteand Gnome UI withpmbootstrap init - Generate the rootfs with
pmbootstrap installto install Nura to the phone orpmbootstrap install --sdcard /dev/sdXto install it on an SD card. - Generate the flashable images with
pmbootstrap export. They will be stored in/tmp/postmarketOS-export, or you can specify another location like this:pmbootstrap export /home/user/Downloads/pmos - Reboot into download mode
- Flash Nura with
heimdall flash --BOOT /tmp/postmarketOS-export/boot.img --SYSTEM /tmp/postmarketOS-export/samsung-j8y18lte.img(replace the paths if necessary). If you installed to an SD card, specify only the BOOT argument. Also you may choose the bigger USERDATA partition for the system image. - The phone should reboot straight into Nura.