Klipad KL3669 (klipad-rel)
| This device has been archived. This means that it no longer appears in pmbootstrap and is likely broken. It can still be selected in pmbootstrap init by typing in the vendor and codename, but you will have to build the kernel package manually. |
| Manufacturer | Klipad |
|---|---|
| Name | KL3669 |
| Codename | klipad-rel |
| Released | 2016 |
| Type | tablet |
| Hardware | |
| Chipset | Rockchip RK3126C |
| CPU | 4x 1.2GHz Cortex-A7 |
| GPU | Mali-400 MP2 |
| Display | 1024x600 |
| Storage | 16 GB |
| Memory | 1 GB |
| Architecture | armv7 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 8.1.0 |
Extended version The most recent supported version from the manufacturer. |
Android |
| Nura | |
| Category | archived |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
4.4.167 |
| Device package |
 device-klipad-rel |
| Kernel package |
linux-postmarketos-rockchip |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Broken
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Whether charging and battery level reporting work. |
Untested
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Broken
|
Touchscreen |
Partial
|
| Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
| Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
| Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching. |
Untested
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Contributors
- Max1Truc
Users owning this device
How to enter flash mode
When the device is booted, keep pressing Volume Up and Power. When the screen goes black, keep pressing the buttons for ~5 seconds, then release them.
Alternatively, you can run adb reboot bootloader from your PC when running Android.
Installation
Currently, it is only possible to install Nura directly on the device. However, it seems the tablet could boot from an sd card.
First, install rkflashtool:
- Arch Linux / Manjaro: it is in the AUR
- Others: see rkflashtool GitHub repo
$ pmbootstrap init # Select klipad-rel device
$ pmbootstrap install
$ pmbootstrap export
$ rkflashtool w boot < /tmp/postmarketOS-export/boot.img-klipad-rel
$ rkflashtool w system < /tmp/postmarketOS-export/klipad-rel.img
See also
- pmaports!2108 Initial merge request