HP EliteBook Ultra G1q (hp-elitebook-ultra-g1q)
| This device is supported as part of a generic port. Refer to Nura Trailblazer (postmarketos-trailblazer) for installation instructions and more information. |
|
An HP EliteBook Ultra G1q with Sway. fastfetch, vkcube, and glxgears are all shown. | |
| Manufacturer | HP |
|---|---|
| Name | EliteBook Ultra G1q |
| Codename | hp-elitebook-ultra-g1q |
| Model | EliteBook Ultra G1q |
| Released | 2024 |
| Type | laptop |
| Hardware | |
| Chipset | Qualcomm Snapdragon X Elite (X1E78100) |
| GPU | Adreno X1-85 |
| Display | 2240x1400 LCD @ 60hz, 16:10, 14" |
| Storage | 512 GB/1 TB |
| Memory | 16 GB |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Windows 11 |
Extended version The most recent supported version from the manufacturer. |
Windows |
| Nura | |
| Category | testing |
Pre-built images Whether pre-built images are available from the Nura Installation page. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
26057.2 |
| Generic port | Nura Trailblazer (postmarketos-trailblazer) |
| Device package |
device-device-hp-elitebook-ultra-g1q out-of-tree |
| Kernel package |
|
| Firmware package |
|
Initial MR Initial merge request. |
pmaports!7270 |
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
|---|---|
Internal storage eMMC, SD cards, UFS... |
Works
|
Battery Whether charging and battery level reporting work. |
Broken
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
Keyboard Whether the built-in physical keyboard works. |
Works
|
Touchpad Whether the built-in touchpad works. |
Works
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
| Connectivity | |
Wi-Fi |
Works
|
Bluetooth |
Works
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB-A Whether the full-sized USB-A port works. |
Works
|
USB OTG USB On-The-Go or USB-C Role switching. |
Untested
|
HDMI/DP Video and audio output with HDMI or DisplayPort. |
Broken
|
| Sensors | |
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Untested
|
Proximity |
Untested
|
Hall Effect Measures magnetic fields; usually used as a flip cover sensor |
Works
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Broken
|
Contributors
Maintainers
Users owning this device
- Askiiart (Notes: currently on debian forky)
Installation
Press Escape during boot, then F10 to enter the UEFI setup. Disable Secure Boot and continue.
There are two ways to create the image.
Follow Installation/Using pmbootstrap. Use hp-elitebook-ultra-g1q; the stable kernel is recommended, but any should work.
Note: pmboostrap in WSL is unsupported and may not work, so you may have to build the image in a virtual machine or on a separate machine.
USB
This is already configured in the device image, and is only listed here for the sake of documentation. However, not all USB-C functionality is tested, there may be other issues.
USB-A may function regardless (untested), but blacklisting the qcom_q6v5_pas module is required for functional USB for at least the type-C ports. Charging still works regardless.
Battery sensing
The battery sensing does rarely work, but usually not. Currently unclear why. You certainly shouldn't rely on it - if you need it, figure it out then tell me (askiiart), or
Audio
WARNING: enabling your audio is very risky, you can permanently damage your hardware.
Audio doesn't work out of the box. If you'd like to get it working, check out asus-s5507q's section on Audio and Enabling sound on the HP Omnibook X14 and others (this laptop is extremely similar to the X14, it's likely identical audio).
WiFi firmware
This is already configured in the device image, and is only listed here for the sake of documentation
This variant of the QCNFA765 isn't supported in the board-2.bin file provided by linux-firmware-ath11k. /lib/firmware/ath11k/WCN6855/hw2.0/board-2.bin.zst is replaced with a modified version
Recommended packages
Graphics
For hardware-accelerated graphics, you'll need to install mesa-vulkan-freedreno.
Various notes
Poor performance booting off USB drives
During older testing, I noticed very poor performance booting off my USB drive for no clear reason, despite it working fine previously. Maybe this is due to using GNOME now and Sway previously? Unclear. Regardless, it works fine after imaging the SSD.
Fixed issues
- As of ~October 2025, Bluetooth failed to connect but could scan. It now works perfectly.
- Previously when testing with linux-next, the blacklist in #USB was required to make sure the USB holding the OS isn't reset, but as of February 2026, with the qcom kernel, it's not required. Untested since October 2025, this may still be required on linux-next.