Jump to content

FiberHome HG680-P (fiberhome-hg680p)

From Nura Wiki
Note This device is supported as part of a generic port. Refer to Amlogic Generic AArch64 TV Box (amlogic-aarch64-tvbox) for installation instructions and more information.
FiberHome HG680-P
File:FiberHome_HG680-P_Indosat_GiG.jpg
Manufacturer FiberHome
Name HG680-P
Codename fiberhome-hg680p
Released 2017
Type set-top box
Hardware
Chipset Amlogic S905X
CPU Quad-core 1.2 GHz Cortex-A53
GPU ARM Mali-450
Display Up to 2160p over HDMI
Storage 8GB
Memory 1GB / 2GB
Architecture aarch64
Software
Original software
The software and version the device was shipped with.
Android (TV) 6
Extended version
The most recent supported version from the manufacturer.
Android (TV) 9
FOSS bootloader partial
Nura
Category testing
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
yes
Generic port Amlogic Generic AArch64 TV Box (amlogic-aarch64-tvbox)
Device package device-amlogic-aarch64-tvbox
Kernel package linux-postmarketos-amlogic
Features
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Untested
Internal storage
eMMC, SD cards, UFS...
Partial
SD card
Also includes other external storage cards.
Works
Multimedia
3D Acceleration
Works
Audio
Audio playback, microphone, headset and buttons.
Works
Connectivity
Wi-Fi
Works
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Untested
HDMI/DP
Video and audio output with HDMI or DisplayPort.
Works
U-Boot
Primary Bootloader
Whether it is possible to replace stock bootloader with U-Boot.
Partial
Secondary Bootloader
Whether it is possible to chainload U-Boot from stock bootloader.
Works
Mainline
Whether latest upstream versions of U-Boot are not broken and it is possible to use them.
Partial
Internal Storage
Whether it is possible to boot from internal storage (e.g. eMMC or UFS).
Works
SD card
Whether it is possible to boot from SD card.
Works
USB Host
Whether it is possible to boot from a USB storage or connect a keyboard.
Works
USB Peripheral
Whether it is possible to use device as a peripheral in U-Boot, e.g. for fastboot mode.
Works
Display
Works
Keyboard
Works
Buttons
Whether it is possible to navigate in boot menu or grub with volume and power buttons.
Works

An Amlogic S905X-based Android set-top box manufactured by FiberHome. It is commonly distributed as an ISP-branded over-the-top (OTT) device, notably by Indonesian ISP IndiHome and Indosat GIG.

Installation

Follow instructions in Amlogic Generic AArch64 TV Box (amlogic-aarch64-tvbox) to put Nura on a MicroSD Card, select device fiberhome-hg680p. After that:

  1. Put the SD card you installed Nura on in the SD card slot
  2. The steps below need to be done only once (unless you format the internal eMMC)
    1. From a running Android OS, open terminal emulator then type reboot update

A mainline U-Boot should load, and Nura should boot up.

Variants

There are two variants of the HG680-P known so far. The first variant has TWCITV086-A-DW printed on the PCB and has 1GB of RAM, while the second variant has TWCITV086-D-DW printed on the PCB with 2GB of RAM.

Wi-Fi

Different variants might have different Wi-Fi chip on it. You need to open the case and inspect the PCB to see which Wi-Fi chip your device has. It is usually either Realtek RTL8188FTV, or Realtek RTL8189FTV.

RTL8188FTV

This Wi-Fi chip is connected internally via USB and is fully supported by Linux. It should work immediately.

RTL8189FTV

This is a less common SDIO-based chip and has no mainline support. In order to enable Wi-Fi, we need to compile an out-of-tree driver. Follow the steps on ZTE ZXV10 B860H (zte-b860h)#Wi-Fi for installation.

Contributors

Users owning this device


See also